KSC Glock Stock Parts Received Today

Just arrived today several ksc glock parts for my customers
- Inlet valve magazine, compatible for all ksc glock mags
- Auto sear for ksc glock 17, 19, 26 and 34
- Loading nozzle for ksc glock, compatible to all glock's model
- Magazine lip for all ksc glock magazine

Magazine Lip & Valve Hammer for Ksc Glock Series

Few days ago, I recive few parts for my customer;
- Magazine lip for ksc glock magazine
- Valve hammer for ksc glock series

New parts recive:

- Ksc Glock Original Rear Sight (fixed type), compatible for all glock models by KSC
- Loading Muzzle for ksc Glock
- Left Sear for ksc Glock Auto, 18c, 23f and 26c
- Loading Nozzle for all glock models
- Part no.280 for ksc glock 18c

Spare Parts For KSC/KWA mp7 and Glock Series

Yesterday spare parts from Taiwan arrived, these for KSC/KWA Mp7 and KSC Glock series. All original KSC parts.

- Magazine seal for KSC Glock series part no.217
- KSC/KWA Bolt Release Bar for Mp7 part no.41

KSC Parts Arrived: Glock & MP7

Just today I received package from Taiwan for my customer.They're all original KSC
- Piston Head for KSC/KWA MP7, notice darker color, new batch maybe
- Loading Nozzle Spring for KSC Glock Series
- Loading Nozzle KSC Glock Series
- Magazine Lip for KSC Glock Series, though these are original ksc, it's made of abs plastic

Interchangle Parts KSC Glock vs KSC M4 Gbbr : Rocket Valve

Again this is based on some webstore said that rocket valve from action are compatible for ksc glock 17, ksc m4 and usp.
Now i have both parts to compare. Please see below pictures

Part List KSC - KWA M4 GBBR, Where You Can Buy

Here are few list of KSC M4 GBBR parts, and from what webstore you can buy, this may not complete, but i hope this will help you in any way. Oh, this part also compatible for KWA Magpul GBBR, except for bolt in USA version, and few part in hop up assembly.

GHK AKMSU Using Handguard RIS for AEG, CYMA Handguard Ris.

Now i'' explain how to modify Cyma Handuard Ris Ak 74u and install to GHK AKMSU gbbr.

GHK AKMSU Using AEG's Accessories? Yes it is Possible.

Just look at my beautiful ak's

Spring For Ksc Glock Rocket Valve, Just Arrived

Just arrived this spring from Taiwan, original KSC spring rocket valve for glock, compatible to all glock models

More Parts Arrived for KSC Airsoftgun from Taiwan

New parts arrived from taiwan:

- Magazine seal for ksc glock, compatible for all glock series
- Falcon hopup rubber for ksc m4 gbbr
- Ksc Pin Selector for Ksc Glock 18c, 23f and 26c
- Piston head for ksc mp7 gbbr
- Piston head ksc glock,compatible for all series
pic:

GHK AKMSU, New Family Member

GHK AKMSU,
She's Just Plain Beautiful ....

WTS: Local Made, KSC M4 GBBR Short Outer Barrel

I like to sale ksc m4 gbbr short outer barrel (17cm/ 6,7inch), mint condition, made from aluminium.
Price $US 20, exclude shipping, payment via paypal.

If you interested , here's my contact:

Picture below:

Parts Arrive Today: Rocket Valve KSC Glock, Nozzle Spring for Ksc MP7 and MP9

Just arrive from Taiwan:
- Rocket Valve for KSC Glock Series
- Nozzle Spring for KSC MP9
- Nozzle Spring for KSC MP7
- Magazine Gasket Rubber For KSC MP7
- Nozzle Spring For KSC Glock Series

WE G36 GBB Series Parts

WE IdZ Stock - Carry Handle Set for G36 Series

Price: $ 86

WE M14 GBBR Parts

M14 Complete Steel Trigger for WE M14 GBBR by RA-TECH

 Price: $ 291

Another Co2 12 grams Canister Refillable Arrived

More than dozen canister co2 12 gram arrived to day. All for one customer
Pic:

Packet Of KSC Stock Parts Arrive, for glock and mp7

Just today receive package KSC parts (for glock and mp7)
- Piston head ksc/kwa mp7, original stock part
- Magazine rubber seal, compatible for all ksc glock models
- Nozzle spring for ksc/umarex mp7

KSC/KWA M9 Beretta Spare Parts - updated

Here Price List Some Beretta M9 original part made by KSC/KWA (system 7)

KSC M92 S7 part no.320 ( Breech )
Price: $ 13,50

DIY Tool For Disassembly Airsoftgun : PIN PUNCHER

Why spending $5 for single pin puncher when you can get 1 set?
Really, just buy cheapest Eyeglass Screwdriver than flat sand the tip, see picture below. Watch right screwdriver, i already flat sand it. Remember to sand it really flat, no round corner.

KSC Glock 18c Exploded Diagram

KSC Gas Blow Back Pistol Glock 18c Exploded diagram (click for bigger picture)

Just Arrived: CO2 12gr Refillable Canister

This CO2 canister is refillable, you can fill it with green gas. So it will be more cheaper and you gun will be allowed use in war game. This four canister is ordered by my customer.

On right side is one time use CO2 12gr canister made by Guarder

Finish Project! Downgrading KWC Mini UZI, Skirmish-able

I have told you before, now i have my kwc uzi skirmishable, so this is what i do to my KWC Mini Uzi 6mm bb CO2:

Replace KWC UZI Inner Barrel With AEG Tight Bore

This one my my plan to downgrade fps of my kwc mini uzi and make it skirmishable. Replace stock tight barrel with madbull 6.01 300mm.

Just Arrived: Another Part For GHK and KSC MP7 Piston Head

Just arrived today, most sold part from ksc/umarex mp7 piston head. And GHK AK hopup set (stock) made from abs. This hopup is one of weak part from ghk ak gbbr.

Just Arrive: Refillable Co2 12g Canister, parts for ksc mp7 and glock

Just arrived, package from taiwan and hongkong for my customer:
- Refillable CO2 12g canister, made from stainless steel, look strong, but doubt rubb

Disassembly KWC Mini Uzi Hopup

After Open Upper Cover, remove outer barrel.
First, push inside this part (mark green), then turn counter-clock-wise this part (mark red arrow) until loose. Then you can pull outer barrel (mark blue) off.

KWC Mini UZI Disassembly Diagram (explode diagram), Current Version

Here Disassembly Diagram of KWC Mini Uzi, this is the current version:, click for larger version

Disassembly KWC Mini UZI Bolt

 Disassembly bolt is easy, but its kind of tricky when asssmbly the nozzle recoil, but it not such big problem.
Here's how

Disassembly KWC Mini Uzi Cover

It's quite simple, if you have manual book, how to disassembly instruction writen there. Here's the picture:

KWC UZI with AEG Inner Barrel? Possible

This is my latest work, KWC UZI with madbull 6.01 300mm inner barrel. I do this to improve its acurracy and range. I'm planning to convert this to greengas (gas adapter is on the way) and use this in open skirmish area. Here she is:

HK416 Kit for KSC M4 with 10.5' outer barrel & MK12 Mod1 Front Set

New Kit For KSC M4 GBBR, Front Set
Picture below: 

How To Fix Sticky Nozzle/Bolt Ksc M4 / KWA LM4, Causing Missfeed

When loading nozzle (bolt) stick in the chamber (hopup dial house) this cause missfeed. And some times break the nozzle spring. So what i do is sanding chamber with light sand paper, i use number 360.

KWC Mini UZI 6mm CO2

Few weeks a go one visitor email me to help him/her to search for kwc mini uzi magazine lip, this remain me again of old memory how badly i wanna hold this baby.he.he.he. So i decided to buy 6mm bb's version.

How To Disassembly KSC M4A1, KWA LM4, Magpul Bolt (Loading Nozzle)

In this page I'll show how to disassembly KSC M4A1, KWA LM4, Magpul Bolt or Loading Nozzle (???), here picture to help you.

Fixing Double Feed, Jammed, Broken BB's on KSC-KWA M4 GBBR

A very frustating problem with ksc/kwa m4 gbbr is what usually called, jamming coused by double feed, broken bb's on chamber or around bolt. I've face this problem, and this cause by chipped arm of loading nozzle.

Receive KSC Stock Parts for My Friends

Today i receive several parts for KSC from Taiwan:
- Spring For Loading Nozzle, KSC M4A1 GBBR
- Piston rubber for KSC/Umarex/KWA

KSC/KWA M4 GBBR Spare Parts - updated

KSC M4 GBBR Complete Bolt Carrier

Price: $ 130





KSC M4 GBBR part no.57-2

Price: $ 31

An Old Friend, KSC M4A1 base

KSC M4A1
- Short Outer barrel (local made)
- Madbull MFR 9' RIS
- G&P Troy Sight

GHK AKM With HomeMade Folding Wood Stock

So this is my latest custom for ghk akm gbbr, it's a 2012 version. I didn't make the woodstock, only the folding mechanism. I use door hinges and window's lock for lock mechanism. Not very fancy but i love my

GHK AKM with Home Made Upper Front Grip

This is 2012 version of GHK AKM, and this babe is so beautiful, works so greate. No major problem. I bought this from friend and iam the third owner. Yes iam!!hehehe. The only thing you need to replace auto sear that will broken somehow, change to steel version.

KSC MP7 Parts (original KSC) - updated

Here list of ksc mp7 stock part you can order from us:


KSC MP7A1  #31 ( Piston Ring ) ,  compatible with KSC

Price: $ 8

KSC Glock Parts (original KSC) - updated

Here list of ksc glock stock part you can order from us:

KSC G18C part #267 ( Separator Sear - Left )
Compatible for: ● KSC G18C ● KSC G23F ● KSC G26C

Price: $ 3.50